1. Clean the walls, glass and the base of the floor in the room every day to avoid the accumulation of dust and paint.
2. Clean the air inlet dust screen every week and check whether the exhaust dust screen is clogged. If the air pressure in the room increases for no reason, the exhaust dust screen must be replaced;
3. The floor dust-proof fiber cotton should be replaced every 150 hours of work;
4. The air intake and dust screen should be replaced every 30 oh of work.
5. Clean the floor water tray every month, and clean the diesel filter device on the burner;
6. Check whether the drive belts of the air intake and exhaust motors are slack every quarter.
7. Clean the entire paint booth and floor network every six months, check the circulating air valve, air intake and exhaust fan bearings, check the exhaust channel of the burner, clean the deposits in the fuel tank, clean the paint booth water-based protective film and re-spray .
8. The entire heat energy converter, including the combustion chamber and the exhaust duct, should be cleaned every year, and the paint roof cotton should be replaced every year or every 1200 hours of work.
Of course, to present a perfect car paint work, rigorous process, strict operation specifications, and skilled operation skills are all indispensable prerequisites. It is undeniable that a reasonable choice and planning of the paint room can not only meet the highest level of satisfaction. The requirements of spray painting can spray a flawless body paint surface in the shortest time, and it can also bring a safe, healthy, bright and comfortable working environment to the spray painter.
Development statusedit
The price of the low-end domestic paint booth ranges from 22,000 to 60,000, and the high-end price ranges from 60,000 to 150,000. There are many types of products. The main types of circulation are: outdoor rainproof paint booth, fuel type high temperature paint booth, teaching spray paint booth, large channel type paint booth, environmentally friendly paint booth, telescopic mobile paint booth, spray booth without pump water curtain, infrared paint Room and standard paint room, etc., with different functions; the general paint room adopts an assembled structure, and the room body adopts the plug-in thermal insulation spray wall panel, which has good sealing and thermal insulation performance. The side of the room body is equipped with a working door for the convenience of the staff. In and out, the aluminum-alloy edging gate, the center of the door is equipped with an observation window, you can observe the dynamics of the room at any time, and the auxiliary equipment in the baking room is also endless. The higher utilization rate is: fan, burner, lighting, bottom plate, filter cotton , Electric control box, generator room, baking lamp, high-efficiency heat energy converter, etc. Of course, the specific configuration and model depend on the factory's planning for its own prospects.
